A lot of my clients ask if they can pair their NuFACE microcurrent devices with professional facial waxing, and the answer is a definite yes, if you do it right. Used together, these two treatments can seriously up your skincare game, tackling both unwanted hair and muscle tone for a much more refined, youthful look than you’d get from either one alone. The real question is how to time them correctly to get that complementary facial rejuvenation everyone’s after.
Key Takeaways
- NuFACE and other microcurrent devices send low-level electrical currents into your facial muscles to help lift and improve your contour.
- A good facial wax doesn’t just remove hair. It also exfoliates off dead skin, giving you a smooth base for any other treatment.
- Timing is everything. You absolutely have to wax first, then wait a few days for your skin to calm down before using your microcurrent device.
- When you pair them correctly, your products will sink in better and you’ll get a more lifted, glowing look.
- Talk to a licensed esthetician. They’ll help you figure out the best timing and product routine for your specific skin.
Understanding NuFACE Microcurrent Technology
So what is microcurrent technology? At its core, NuFACE devices send a super low-level electrical current into your skin to reach the facial muscles. It’s a non-invasive treatment that actually got its start in the medical field for treating conditions like Bell’s palsy, but the beauty world quickly adopted it for anti-aging. The idea is that these tiny currents copy your body’s own natural electrical signals, which wakes up your cells and helps re-educate the muscles underneath.
When you use it regularly, the main point is to improve your facial contour, think a tighter jawline, more defined cheekbones, and lifted brows, while also softening fine lines. You have to use a conductive gel with the device, because that’s what allows the current to actually get to the muscles. It’s all about consistency. You’ll likely start with daily use for the first month or two, then switch to a maintenance routine a few times a week. It works by stimulating ATP (adenosine triphosphate) production, which gives your cells the energy they need to repair themselves and function better. It’s just basic cellular biology being put to work for your skin.
The Benefits of Professional Facial Waxing
A professional facial waxing is also an amazing exfoliation treatment. A good esthetician removes not only the unwanted hair but also the top layer of dead skin cells, leaving your face incredibly smooth and soft. This creates a perfect base for makeup and helps your skincare products absorb so much better. And because waxing pulls the hair out from the root, unlike shaving, the hair grows back slower and often finer over time. You’ll get to enjoy that smoothness for about three to four weeks, depending on how fast your hair grows.
Regular waxing is also great for your skin’s health. All that exfoliation helps keep pores from getting clogged and reduces the chance of getting ingrown hairs, which is a constant battle with shaving. Without all that peach fuzz, your skin looks brighter and your tone more even. It’s a key prep step before you do anything else. A trained esthetician will know exactly what your skin needs, recommending the right post-waxing care to cut down on irritation. For example, if you have sensitive skin, they might use a hard wax that grabs the hair but not your skin, which makes the whole process much more comfortable.
Teamwork: How NuFACE and Waxing Complement Each Other
Pairing NuFACE microcurrent therapy with facial waxing is how you get some serious facial rejuvenation. The waxing preps the skin, and the microcurrent perfects it. By waxing first, you’re getting rid of all the hair and dead skin that would otherwise get in the way, meaning your skin is perfectly prepped for what comes next. A clean, smooth surface is exactly what you want for microcurrent, because it lets the device’s low-level currents conduct much more effectively.
Silky-smooth legs that stay soft for weeks
Skip the daily shave. Find a top-rated waxing studio near you and book your first visit in minutes.
Find a Wax Studio Near You →With no hair or gunk in the way, the conductive gel you use with your NuFACE can get right down to business, making clean contact with the skin. This ensures the microcurrents are delivered evenly to the muscles for better, more consistent toning and lifting. Then, the microcurrent treatment boosts circulation and cellular energy, which makes your skin healthier and even more radiant after the wax. The two treatments feed off each other: the wax preps the skin for the NuFACE, and the NuFACE improves the skin’s health, making the smooth results from the wax look even better. I’ve seen it with my clients, the ones who stick to this combo get a smoother texture and a real lift that they just couldn’t get with one or the other. It’s all about the cumulative effect.
Think about it practically: a freshly waxed face is a clean slate. There are no tiny hairs or excess oils to block the NuFACE probes, so the current has a clear path to do its work. Your skin’s barrier is a little sensitive right after a wax, but it bounces back fast. By the time you’re ready for your microcurrent session a couple of days later, your skin is in the perfect state to receive the treatment. You’re just maximizing what each treatment can do by understanding how they work together.
Optimal Timing and Application for Combined Treatments
To get the best results from using NuFACE microcurrent therapy after a facial waxing, your timing has to be right. The number one rule is to always wax first. You have to give your skin a break before you bring in the microcurrent device. Waxing always causes some temporary redness and sensitivity, and if you try to use a NuFACE on that freshly irritated skin, you’re just asking for more inflammation and discomfort.
You should wait at least 48 to 72 hours after waxing before you even think about picking up your NuFACE. That’s enough time for the redness to go down, for your skin’s protective barrier to repair itself, and for any tiny scrapes to heal. In that waiting period, just focus on keeping your skin calm and hydrated with gentle products that won’t clog your pores. After a couple of days, when your skin feels normal again, you can start your microcurrent routine. Just make sure to apply a good conductive gel to clean, dry skin first.
If you’re new to this combo, you really need to talk to a licensed esthetician. We can look at your skin type and hair growth to create a schedule that actually works for you. For instance, if your skin is super sensitive, I might tell you to wait a full 96 hours after your wax or do a small patch test with the NuFACE before you do your whole face. Getting that professional advice is the best way to make sure you’re doing things safely and getting the results you want without any surprise reactions. We’ll also point you to the right aftercare products to help your skin recover and get it ready for microcurrent.
Potential Considerations and Best Practices
Even though NuFACE and waxing work well together, you have to be smart about it. The biggest thing to watch out for is skin sensitivity. Everyone’s skin reacts differently to waxing, and if yours is extra sensitive, using a microcurrent device too soon is a bad idea. You have to listen to your skin, if it feels at all tender or looks inflamed, just wait. Pushing through will only lead to more irritation and discomfort.
Product compatibility is also a big deal. The soothing moisturizers you use after waxing need to play nice with your microcurrent device. A huge no-no is using any oil-based products right before your NuFACE session, as oil will completely block the current from getting through. Stick to water-based hydrating serums and gels. You also need to pay attention to any other actives in your routine. If you’re using retinoids or strong acids, you’ll want to stop them for a few days before and after your wax to avoid making your skin even more sensitive.
And please, only buy your NuFACE from an authorized retailer and get your waxes from a licensed professional. There are so many fake devices out there that won’t work correctly and could actually hurt your skin. Going to a certified and experienced esthetician is just as important, because they know how to avoid causing irritation, ingrowns, or burns. A pro uses good wax and follows strict hygiene rules (it’s the law). For example, here in Georgia, we have to go through extensive training on skin anatomy and safe hair removal. We know what we’re doing, and the advice we give you for taking care of your skin is based on that training.
When you thoughtfully combine NuFACE treatments with professional waxing, you can build a really effective routine. Just be patient, let your skin recover after the wax, and use the right products. Do that, and you’ll get a smoother, more toned, and glowing complexion by getting the most out of both treatments. If you’re curious about how waxing stacks up against other methods, check out this comparison of waxing vs. trimmers in 2026.
Can I use my NuFACE device immediately after facial waxing?
Definitely not. You need to wait at least 48 to 72 hours. Your skin needs time to calm down and recover from the irritation of waxing before you introduce any microcurrent.
Why is timing so important when combining these two treatments?
Because waxing leaves your skin sensitive and a bit raw. If you use a microcurrent device on it right away, you’re likely to cause more irritation and discomfort. Giving your skin a couple of days to heal makes the whole process safe and effective.
Does waxing actually make NuFACE treatments work better?
It does, in a way. Waxing clears the canvas by removing hair and dead skin. This smooth surface helps the NuFACE’s conductive gel make better contact, which means the microcurrent can get to your muscles more effectively.
What kind of products should I use between waxing and my NuFACE session?
Stick to simple, gentle, and hydrating products in the days between treatments. Think soothing, water-based serums and moisturizers. Stay away from anything harsh like acid exfoliants or retinoids, and avoid oils, which can block the microcurrent.
Should I talk to a pro before I combine NuFACE and waxing?
Yes, please do. A licensed esthetician can look at your specific skin and give you a personalized plan. We can tell you exactly how long you should wait and which products are best for you, ensuring you get great results without any issues.